NSK EDD Megatorque Motor - Glossary of Commands and Parameters

9. Details of Command and Parameter
— 9-8 —
9.3. Glossary of Command and Parameter
 The password must be entered before input of a command that is marked with “”.
 No entry of the password is necessary for setting to a program.
 Depending on its option code, a command marked with “()” requires entering the password.
 A command marked with “()” is for factory use only. The user is not allowed to input the command.
 A command that is marked with “P” indicates that you can also input the command to an internal
program.
 A command that is marked with “P ex.” is exclusive for internal program use.
 “Shipping set” denotes a value that is set in the factory before shipment.
 Conditions to be met denotes that required conditions for execution of the command.
 If the all conditions are not met, error of “COND. MISMATCH?” occurs.