NSK EDD Megatorque Motor - External Dimensions; Megatorque Motors; PS Series

2. Specifications
— 2-15 —
2.6. External Dimensions
2.6.1. Megatorque Motors
2.6.1.1. PS Series
Fig 2-15 PS1004 type Motor
6-M4 × 0.7 depth 7
PCD92 (60° equal pitch)
Rotor Shaft
(rotation part)
Material: Stainless
Rotation Part
Resolver Connector
Motor
Connector
Do not use
6-M4 × 0.7 depth 6
PCB45 (60° equal
pitch)
Fixed Part
Material: Iron
Surface Treatment: Electroless
Nickel Plating
Do not use
Fig 2-16: PS1006 type Motor
6-M4 × 0.7 depth 7
PCD92 (60° equal pitch)
Rotor Shaft
(rotation part)
Material:
Aluminum
Rotation Part
Resolver Connector
6-M4 × 0.7 depth 6
PCD45 (60° equal pitch)
Fixed Part
Motor Connector
4 or more
Caution : The bend radius of the motor cable lead ( φ 7) and the resolver cable lead
( φ 7) should be R30 [mm] or more.
Caution : Do not use the leads of the motor cable and the resolver cable with
flexing motion.
Caution : Do not add the stress (tension, vibration, etc) to the joint of the leads and
the connector. It causes the disconnection and the loose connection.
！
！
！