NSK EDD Megatorque Motor - Examples of System Configuration

2. Specifications
— 2-2 —
2.1.2. Examples of System Configuration
Fig 2-1: System configuration for program operation
Megatorque Motor
PLC*
Motor controller*
24 VDC
power supply*
Driver Unit Model EDD
Motor cable
Resolver cable
Signal for control I/O
Power supply for
control input
* The user shall provide
these devices.
RS-232C
communication
(USB
communication)
PC*
Main power
Single phase: 100 to 240 [VAC]
Circuit breaker*
(MCCB)
Noise filter*
Magnetic
contactor*
Handy Terminal
Fig 2-2: System configuration for pulse train operation and analog input operation
Pulse train input/analog input
operation
Megatorque Motor
PLC*
Motor controller*
Driver Unit Model EDD
Motor cable
Resolver cable
Signal for control I/O
Power supply for
control input
* The user shall provide
these devices.
RS-232C
communication
(USB
communication)
PC*
Main power
Single phase: 100 to 240 [VAC]
Circuit breaker*
(MCCB)
Noise filter*
Magnetic
contactor*
Handy Terminal
24 VDC
power supply*