NSK EDD Megatorque Motor - Handy Terminal

2. Specifications
— 2-9 —
2.3.3. Handy Terminal
Fig 2-13: Handy Terminal M-FHT31
Cable
(Cable length )
Numeric keys
Code keys (superscript)
Alphabetic keys
Special code keys
SHIFT
：Shift key
Note 1)
CTRL
：Control key (Not used)
SP
：Space key
Note 2)
BS
：Back space key
Note 3)
ENT
：Enter key
Note 4)
Frame
LCD
Note: (1) SHIFT: Press number key while pressing the SHIFT key to enter a
code key. The superscript of each numeric key may be entered.
(2) SP: Use this key to input a blank between letters.
(3) BS: BS: Press the BS key when correcting logged in mistakes.
(4) ENT: Press the key at the end of a command or parameter setting.
Connector
ESC
：Escape key (Not used)