NSK EDD Megatorque Motor - Page 38

2. Specifications
— 2-16 —
Fig 2-17: PS1012 type Motor
6-M4 × 0.7 depth 7
PCD92 (60° equal pitch)
Rotor Shaft
(rotation part)
Material:
Aluminum
Resolver Connector
6-M4 × 0.7 depth 6
PCD45 (60° equal pitch)
Fixed Part
Motor Connector
5 or more
Rotation Part
Fig 2-18: PS1018 type Motor
6-M4 × 0.7 depth 7
PCD92 (60° equal pitch)
Rotor Shaft
(rotation part)
Material:
Aluminum
Resolver Connector
6-M4 × 0.7 depth 6
PCD45 (60° equal pitch)
Fixed Part
Motor Connector
6 or more
Rotation Part
Caution : The bend radius of the motor cable lead (ø 7) and the resolver cable lead
(ø 7) should be R30 [mm] or more.
Caution : Do not use the leads of the motor cable and the resolver cable with
flexing motion.
Caution : Do not add the stress (tension, vibration, etc) to the joint of the leads and
the connector. It causes the disconnection and the loose connection.
！
！
！