Appendix
— A-11 —
(2) Execute uploading (back up the data to the memory of the Handy Terminal from the Driver
Unit.)
Press the keys in order of 1 and ENT for inputting the name of backup file.
(3) For an example, name the file as “EDD01”.
［Upload］
File Name EDD01_
An input of the ENT key calls up the confirmation screen to start uploading.
［Upload EDD01］?
1:Yes
2:No
(4) Press the keys in order of 1 and ENT to start uploading.
The display scrolls in high speed while uploading. At the completion of uploading, the display
menu changes to the editing menu in the user state.
［Editor］ ?
1:Upload
2:Delete
3:Download
It changes to the normal mode by a press of the BS while pressing the SHIFT key.
How to restore the parameter settings
1) Execute restoring the parameter settings using the memory function of the Handy Terminal FHT31.
(1) While pressing the SHIFT key in the command waiting state, press the BS key for
approximately 3 seconds.
The mode changes from the normal node to the user mode and the menu will be on the display.
［Editor］ ?
1:Upload
2:Delete
3:Download
To Next Page
Loading...
