Oki C650 - Menu List

Changing settings from the operator panel
- 102 -
Menu list
You can print to check the menu list.
Printing the menu map (configuration)(P.86)
 The following items are displayed when the wireless LAN module (optional) is installed.
AirPrint
Wireless(Infrastructure) Setting
Wireless(AP Mode) Setting
Print From USB Memory
Item
Factory
default
settings
Description
Select Print
File
Select the file to be printed.
Print Setup Paper Feed Tray 1 (xx) Specifies the paper feeding tray.
(xx) is the size of the paper loaded in this tray.
Copies
1
Sets the number of copies to be printed.
Duplex
On
Sets whether or not to implement duplex printing.
Binding
Long Edge
Sets the binding method for duplex printing.
Fit
On
Specifies whether to fit to the paper.
Color Mode
Color
Selects whether to print in color or mono.
Barcode Print
Setup
Repeat
1
Sets the number of copies to be printed.
Layout Rows
1
Sets the number of rows on each page.
Layout Columns
1
Sets the number of columns on each page.
Start Position X Coordinate 5 millimeter Sets the X coordinate of the start position (i.e. the direction
perpendicular to the paper travel direction).
Y Coordinate 30 millimeter Sets the Y coordinate of the start position (i.e. the direction
parallel to the paper travel direction).
Spacing X Spacing 5 millimeter Sets the X spacing of the scheduled printing range of
barcodes.
Y Spacing 5 millimeter Sets the Y spacing of the scheduled printing range of
barcodes.
Barcode Type
QRCode
Sets the type of barcodes.
Barcode
Attribute
Error
Correction
Level
Low Sets the error correction level of QRCode.
Module Size
10 x 1.7 mils
Sets the module size of QRCode.
Human
Readable
Character
Non-printing Sets the attributes of 1D barcodes.
Bar Height
29 pixels
Sets the bar height.
Bar Width
8 x 1.7 mils
Sets the bar width.
Configuration
Item
Description
Tray Count
MPTray
Displays the total number of print pages for
each tray.
Trays 2 to 4 are displayed when optional
expansion trays are mounted.
Tray1
Tray2
Tray3
Tray4