Oki C650 - Regulatory Wireless LAN Statements

Appendix
- 383 -
Item
C650/ES6450
Print quality assurance conditions
・ Operating range
Temperature: 10°C; Humidity: 20% - 80% RH
Temperature: 32°C; Humidity: 20% - 60% RH
Humidity: 30% RH; Temperature: 10°C - 32°C
Humidity: 80% RH; Temperature: 10°C - 27°C
・ Full color printing quality assurance range
Temperature: 17°C - 27°C; Humidity: 50% - 70% RH
Consumables
Toner cartridge, image drum
Maintenance parts
Belt unit, fuser unit
*1:Standard-sized paper
Specifications of the expansion tray unit
Item Expansion tray unit
Weight
Approx. 6.0 kg
Dimensions
395 mm (W) x 450 mm (D) x 139 mm (H)
Network specifications
Item
C650/ES6450
Interface
Ethernet 10BASE-T/100BASE-TX/1000BASE-T, IEEE 802.11a/b/g/n Wireless LAN
Protocol TCP/IPv4, TCP/IPv6, NetBIOS over TCP, LPR, Port9100, IPP, FTP, HTTP,
TELNET, SMTP, POP3, SNMPv1/v3, DHCP, DHCPv6, DNS, DDNS, WINS,
Bonjour, SNTP, LLTD, Web Services Discovery (WSD), SSL/TLS, IPSec, LDAPv3,
Kerberos, IEEE802.1X, AirPrint, HTTPS, SMTPS, POP3S, IPPS, FTPS, LDAPS
Wireless LAN specifications
Item
C650/ES6450
Wireless LAN standard
IEEE802.11a/b/g/n compliant (2.4 GHz/5 GHz)
Security
Disabled, WEP, WPA-PSK, WPA2-PSK, WPA-EAP, and WPA2-EAP
Regulatory wireless LAN statements
 FCC Statement
 IC Statement
 Europe-CE Declaration of conformity.
 Singapore-IMDA Telecommunication Equipment Compliance Label
FCC statement
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: