Oki C650 - Loading paper

Basic operations
- 72 -
Loading paper
This section explains the types of paper applicable to this machine, paper precautions and paper storage
methods.
Procedure for loading paper
1. Check the applicable paper.
Applicable paper(P.72)
Inapplicable paper(P.74)
2. Load the paper in the tray.
Paper applicable to each tray(P.76)
Loading paper in Tray 1(P.76)
Loading paper in Tray 2/3/4 (Optional)(P.78)
Loading paper in the MP tray(P.80)
3. Set the paper information (media size, media type, media weight) on the operator
panel.
Setting paper information on the operator panel(P.81)
Applicable paper
In order to maintain high-quality printing, it is necessary to use paper that fulfills the quality, weight and
surface finish conditions. Please use electrophotographic paper.
If you are printing on non-recommended paper, thoroughly test the print quality and paper traction beforehand
and check that there are no problems before use.
For precautions for printing on various types of paper, refer to "
Paper precautions by type(P.74)".
Media Type Paper size Paper weight Other conditions
Plain
A4
For simplex printing:
60 - 256 g/m
2
For duplex printing:
64 - 176 g/m
2
The custom-sized paper must meet the
requirements for plain paper.
B6 half, B7, B8 and 4 x 6 inches paper
are not applicable to duplex printing.
A5
A6
B5
B6
B6 Half
B7
B8
Letter
Legal (13 inches)
Legal (13.5 inches)
Legal (14 inches)
Executive
Statement
8.5-inch SQ
Folio (210 x 330 mm)
16K (184 x 260 mm)
16K (195 x 270 mm)
16K (197 x 273 mm)
4 x 6 inches
5 x 7 inches