Changing settings from the operator panel
- 93 -
Inputting text
You can input alphabetic or numeric characters using the numeric keypad. If a same key is pressed in
succession, the alphanumeric character will switch. To continue tying with the same key, press «OK» after
inputting each alphanumeric character.
The following characters can be input when the corresponding key is pressed.
For a menu that can only input numbers, it will not switch to alphabetic characters.
Key Text to input
2 → a → b → c → A → B → C → 2
3 → d → e → f → D → E → F → 3
4 → g → h → i → G → H → I → 4
5 → j → k → l → J → K → L → 5
6 → m → n → o → M → N → O → 6
7 → p → q → r → s → P → Q → R → S → 7
8 → t → u → v → T → U → V → 8
9 → w → x → y → z → W → X → Y → Z → 9
« »
«Fn»
* → @ → . → _ → - → (space) → + → ! → ” → $ → % → & → ’ → (→ ) → , → / → : → ; → < → = → > → ?
→ [ → → ] → ^ → # → ` → { → │→ } → ~ → *
If the setting value contains [+] and [-], you can switch between [+] and [-] by pressing it while you are
Example
To input "abc",
press «2» «2» «OK», «2» «2» «2» «OK», and «2» «2» «2»«2» «OK».
The functions of the following keys are described below.
«Fn»
Used to quickly display items of the Setting menu. When "Ready To Print" is displayed, press «Fn» and then
the numeric key to display the menu item corresponding to the number.
Setting with the short menu (Fn key)(P.94)
«CLEAR»
Deletes each character individually when a password is input.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
