Oki C650 - Printing PS Errors; Editing Margins

Printing
- 187 -
19 Press ▲ or ▼ to select [Print], and press «OK».
 If the text string in the file (.obc) does not meet the standard of the QR code or barcode to be printed, X is printed on
the QR code or barcode.
 If there is no text string in the file (.obc), a blank page is printed.
Printing PS errors
You can print the error content when a PostScript error occurs.
 This function is not applicable to the PCL printer driver or macOS.
1 Open the file to be printed.
2 Select [Print] from the [File] menu.
3 Click [Preferences].
4 Click [Advanced] in the [Layout] tab.
5 Click [Send PostScript Error Handler] under [PostScript Options], and select [Yes] from the
drop-down list.
6 Click [OK] until the [Printing preferences] is closed.
7 Click [Print] in the [Print] screen.
Editing margins
You can extend the margins to the top, bottom, left, and right to 30.0 mm/1.18 inches, change the printable
area, and print on the paper to be printed.
 This function is available to the Windows PCL printer driver only.
1 Open the file to be printed.
2 Select [Print] from the [File] menu.
3 Click [Preferences].
4 Select the [Job Options] tab.
5 Click [Advanced].
6 Select [Edit Margins] in [Item], set it to [On] in [Settings], and click [Options].
7 Input margin values for [Top], [Bottom], [Left] and [Right], and click [OK].
8 Click [OK].
9 Specify other settings as necessary, and click [OK].
10 Click [Print] in the [Print] screen.