Useful software
- 280 -
4
Click [Detail Setup].
5
Check [Print to more than one printer at a time].
6
Click [Options].
7
Click [Add].
8
Input the IP address of the devices to print at the same time, and click [OK].
9
Click [OK].
Opening the web page of a registered device
You can open the web page of this machine from the OKI LPR Utility.
1
Start the OKI LPR Utility.
2
Select this machine.
3
Select [Web Setting] from the [Remote Print] menu.
When the web port number is changed, the web page cannot be opened.
For details, see "Setting the port number of the web page for the registered device(P.280)".
Automatically following the IP address of the registered device
You can set to maintain the connection to the original device even if the IP address of this machine is
changed.
Administrator privileges are required.
The IP address may be changed when the IP address is dynamically allocated by DHCP, or when the network
administrator has manually changed the IP address of this machine.
1
Start the OKI LPR utility.
2
Select [Setup] from the [Option] menu.
3
Check [Auto Reconnect], and click [OK].
Setting the port number of the web page for the registered device
1
Start the OKI LPR utility.
2
Select this machine.
3
Select [Confirm Connections] from the [Remote Print] menu.
4
Click [Detail Setup].
5
Input the port number of web page in [Port Numbers].
6
Click [OK].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
