Basic operations
- 83 -
About values to be set
Refer to the following table for settings in the case of plain, partially printed paper and colored paper.
Values to be set on the operator panel
Plain 60 - 63 g/m
2
paper: Ultra Light
64 - 74 g/m
2
paper: Light
75 - 82 g/m
2
paper: Medium Light
83 - 90 g/m
2
paper: Medium
91 - 104 g/m
2
paper: Medium Heavy
105 - 120 g/m
2
paper: Heavy
121 - 176 g/m
2
paper: Ultra Heavy 1
177 - 220 g/m
2
paper: Ultra Heavy 2
2
Refer to the following table for settings in the case of index cards.
Values to be set on the operator panel
Paper size Media weight
Index Card 60 - 63 g/m
2
: Ultra Light
64 - 74 g/m
2
: Light
75 - 82 g/m
2
: Medium Light
83 - 90 g/m
2
: Medium
91 - 104 g/m
2
: Medium Heavy
105 - 120 g/m
2
: Heavy
121 - 176 g/m
2
: Ultra Heavy 1
177 - 220 g/m
2
: Ultra Heavy 2
2
Storing paper
Please keep the paper under the following conditions to maintain the quality.
A dark and flat place with low humidity
Temperature: 20°C
Humidity: 50% RH (relative humidity)
Do not store in any of the following places.
Places exposed to direct sunlight
Places with extreme rises and sudden fluctuations in temperature
Places near copiers, air conditioners, heaters, ducts, etc.
Places near the inside of an outer wall
Uneven or curved surfaces
Directly on the floor
Places where static electricity is generated
Do not open the paper until you use it.
Do not leave the paper exposed to the air for a long period of time. You may not be able to print correctly.
Depending on the paper in use, operating conditions and storage conditions, the print quality may deteriorate, or the
paper may be curled or wrinkled.