Oki C650 - Printing from a PC

Management of this machine
- 232 -
1 Check that "Ready To Print" appears on the display.
If the machine is in the power save mode, press «POWER SAVE» to restore.
2 Press the scroll button ▲ or ▼ on the operator panel to select [Local Name], and press «OK».
3 Input your own user name, and press «OK».
4 Input the password using the numeric keypad, and press «OK».
5 Login is complete when "Ready To Print (logged in)" is displayed. The home screen is
displayed.
 You will be automatically logged out after a certain period of time without operating the panel.
Printing from a PC
If access control is enabled, when printing from a PC, input user information in the printer driver to print.
For Windows
In this example, Notepad is used to print from the PCL driver.
1 Select [Print] from the [File] menu.
2 In [Select Print], select the required printer driver, and click [Preferences].
3 Select the [Extend] tab.
4 Click [User Authentication].
5 Set [User name] and [Password] of the user as user authentication information, and
[Authentication Type] to specify the authentication destination and authentication mode of the
user.
[Password], [Authentication Type], and [Use User Authentication] may not be displayed in the screen
depending on the setting of [User Authentication Options] in [Device Options] tab.
6 Check [Use User Authentication] if it is displayed.
Uncheck [Use User Authentication] if the PIN of the job accounting client is used as user authentication
information.
7 Input the user name and password.
The user name may be fixed as login name depending on the setting of [User Authentication Options] of
the [Device Options] tab.
Check [Use logon name as user name] to use the Windows login name as the user name.