Useful software
- 260 -
12
Click [Print Test] to check whether the adjusted color is closer to the color you want, and then
click [Next].
If you want to further change the color or change other colors, repeat Steps 8 to 11.
13
Input a name for the setting, and click [Save].
14
Click [OK].
15
Click [Finish].
For macOS
1
Start the Color Correct Utility.
2
Select the device you want to adjust.
3
Click [Next].
4
Click [Office Palette Tuning].
5
Select the name of the setting, and click [Print Sample].
6
Click [Next].
7
Click [Print Test].
8
Compare the color palette on the screen with the colors of the printed color sample for
adjustment.
The color marked with an x cannot be adjusted.
9
Click the color you want to adjust.
10
Check the adjustable range of X and Y from the pull-down menu.
The adjustable value varies with the specific color.
11
Check the printed color samples, select the most suitable color within the adjustable range, and
then check the X and Y values.
12
Select the values you checked in Step 11, and click [OK].
13
Click [Print Test] to check whether the adjusted color is closer to what you want.
If you want to further change the color or change other colors, repeat Steps 9 to 13.
14
Input a name and click [Save].
15
Select [Printers & Scanners] from [System Preferences], delete the registered adjusted device,
and then re-register.
Changing gamma values and hues
The tone can be adjusted by adjusting the gamma value, and the output color can be adjusted by adjusting
the hue.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
