Oki C650 - Printing by Specifying the Font to Use

Printing
- 173 -
For macOS
1 Open the file to be printed.
2 Select [Print] from the [File] menu.
3 Select the [Print Options] panel.
4 Check [Adjust ultra fine lines] in the [Quality1] tab.
5 Specify other settings as necessary, and click [Print].
 If there is no detail settings displayed in the [Print] screen, click [Show details] at the bottom of the screen.
Printing by specifying the font to use
Using printer-specific fonts
 The printer fonts may not be reproduced as the TrueType font design displayed on screen.
 This function is not available to the Windows PCL printer driver when [Print Mode] is set as [Image], nor to a macOS.
 This function is not applicable to some applications.
For Windows PCL printer driver
1 Open the file to be printed.
2 Select [Print] from the [File] menu.
3 Click [Preferences].
4 Select the [Extend] tab.
5 Click [Font].
6 Check [Font Substitution] in [TrueType Font Output Type].
7 Specify the printer font to be used instead of the TrueType font in [Font Substitution Table].
8 Click [OK].
9 Specify other settings as necessary, and click [OK].
10 Click [Print] in the [Print] screen.
For Windows PS printer driver
1 Open the "Devices and Printer".
How to open the printer folder(P.140)
2 Right-click on the icon of [OKI C650 PS], and select [Printer Properties].
3 Double-click on [Font Substitution Table] in the [Device settings] tab.
4 Click the TrueType font, and select the substitution printer font from the list.
5 Click [OK].
6 Open the file to be printed.
7 Select [Print] from the [File] menu.
8 Click [Preferences].