Troubleshooting
- 366 -
Condensation occurs on printed paper
The paper is moist. Use the paper stored at appropriate temperature and
Storing
This machine is used in a place
with high humidity or sudden
changes in temperature and
Use this machine in an environment with an appropriate
temperature and humidity.
Installation
environment(P.
The edge of the paper is wet. Press the scroll buttons on the operator panel several times
to select [Menus] - [Print Adjust] - [Moisture Control], and
change the setting. This setting may delay the completion
of printing the first page.
-
Streaks appear in the vertical direction
The toner is low. "Toner Low." or "Toner Empty. Replace with a new toner
cartridge." is displayed, replace the toner cartridge.
Replacing the
black(K) toner
cartridge and
the waste toner
Replacing the
toner cartridge
The image drum is scratched. Please replace the image drum.
Replacing the
image
Paper guide is misaligned. Check the position of the paper guide in the paper tray.
Loading