Oki C650 - Connecting Via an Access Point (Infrastructure)

Connecting to the PC after preparing the device
- 42 -
 SSID is also called the network name, ESSID or ESS-ID.
 Encryption key is also called the network key, security key, password, or pre-shared key (PSK).
Connecting via an access point (Infrastructure)
 Put this machine in an unobstructed view position near the wireless LAN access point. (The recommended distance
is 30 m or less.)
 It may be difficult to connect if there is a metal, aluminum sash or reinforced concrete wall between this machine and
the wireless LAN access point.
 IEEE802.11a (W52/W53) is prohibited to use outdoors due to the Radio Law. Use it indoors only. Use it indoor only.
 When using 2.4GHz for a connection, use it within the range of 1 to 11ch.
 When using 5GHz, use it within the range of 36 to 48ch, 52 to 64ch, 100 to 140ch, 149 to 165ch.
1. Enabling the wireless LAN function
1 Power on this machine.
2 Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and
press «OK».
3 Input the admin password using the numeric keypad, and press «OK».
Admin password(P.194)
4 Check that [Network Setup] is selected, and press «OK».
5 Check that [General Setup] is selected, and press «OK».
6 Check that [Extended Network] is selected, and press «OK».
7 Press ▼ to select [Wireless], and press «OK».