Oki C650 User Manual

Connecting to the PC after preparing the device
- 16 -
Installation
Installation environment
Install this machine in the following environment.
Ambient temperature: 10°C to 32°C
Ambient humidity: 20% to 80% RH (relative humidity)
Maximum wet-bulb temperature: 25°C
 Make sure there is no condensation. Failure to do so may cause a malfunction.
 To install this machine in a location where the ambient humidity is 30% RH or less, use a humidifier or static
prevention mat.
 Depending on the installation environment, the operating noise of this machine may cause concern. If you are
concerned about the operating noise, we recommend that you install this machine in an isolated location or a
separate room.
 Do not install this machine near any devices in which combustion takes place. Doing so may cause lighter printing.
 Do not install this machine close to high-temperature locations or naked flames.
 Do not install in locations where chemical reactions occur (e.g. laboratories).
 Do not install this machine close to combustible solutions such as alcohol and thinners.
 Do not install this machine within the reach of children or infants.
 Do not install this machine in an unstable location (e.g. unsteady table or sloping surface).
 Do not install this machine in a humid or dusty location, or in a location exposed to direct sunlight.
 Do not install this machine in an environment with salt air, corrosive gas, NOx, or SOx.
 Do not install this machine in locations with major vibration.
 Do not install this machine in locations where its air vents are blocked.
 Do not directly install this machine on shaggy rugs or carpets.
 Do not install this machine in locations with poor air circulation or ventilation like in a sealed room.
 Ensure proper ventilation when it is used for a long time in a small room.
 Keep this machine away from strong magnetic fields and sources of noise.
 Keep this machine away from monitors and TVs.
 When moving this machine, stand at the front and back and hold the handle at the bottom of the machine.
Installation space
Install this machine on a flat desk which is larger than the bottom of the machine.
Allow sufficient space around this machine as shown in the following figures.
 Plan view (When the optional caster stand is not installed)

Oki C650 Specifications

General

Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6.5 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Wi-Fi	-
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
USB connector	USB Type-A
USB 2.0 ports quantity	1
Printer fonts	PCL
Maximum duty cycle	100000 pages per month
Recommended duty cycle	8000 - 100000 pages per month
Page description languages	Epson FX, IBM ProPrinter, PCL 5c, PCL 6, PDF, PostScript 3
Mobile operating systems supported	Android
Server operating systems supported	Windows Server 2008, Windows Server 2012, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 7, Windows 8, Windows 8.1
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	1940 sheets
Paper tray 2 input capacity	530 sheets
Total number of input trays	4
Multi-Purpose tray input capacity	100 sheets
Paper tray media weight	60 - 256 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6, B7, B8
Maximum ISO A-series paper size	A4
Product color	White
Market positioning	Home & office
Internal memory	3000 MB
Processor family	ARM Cortex-A9
Sound pressure level (standby)	32 dB
Sound pressure level (printing)	54 dB
Storage temperature (T-T)	10 - 32 °C
Operating temperature (T-T)	-10 - 43 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1150 W
Power consumption (PowerSave)	14 W
Power consumption (average operating)	840 W
Maximum copy resolution	- DPI

Weight and Dimensions

Depth	430 mm
Width	395 mm
Height	290 mm