Printing
- 145 -
7
Specify the media weight and other settings as necessary, and click [OK].
If you want to print while checking each sheet, check [Feed paper individually] in the printer driver (or select
[Yes]). To print continuously, uncheck [Feed paper individually] (or select [No]). For details, see "Printing one
sheet at a time manually(P.150)".
8
Click [Print] in the [Print] screen.
For Windows PS printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Click [Advanced] in the [Layout] tab, and select [A4] or [Letter] from [Paper Size].
5
Click [OK].
6
Select [Multi Purpose Tray] from [Paper Source] in the [Paper/Quality] tab.
7
Specify [Portrait] from [Orientation] in the [Layout] tab.
8
Specify the media weight and other settings as necessary, and click [OK].
If you want to print while checking each sheet, check [Feeds paper one by one from the MP tray] in the printer
driver (or select [Yes]). To print continuously, uncheck [Feeds paper one by one from the MP tray] (or select
[No]). For details, see "Printing one sheet at a time manually(P.150)".
9
Click [Print] in the [Print] screen.
For macOS
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Select [A4] or [Letter] in [Paper Size] and the orientation in [Orientation].
4
Select [Multi-Purpose Tray] from [All Pages From] in the [Paper Feed] panel.
5
Specify [Portrait] in [Orientation].
6
Specify the media weight and other settings as necessary, and click [Print].
If you want to print while checking each sheet, check [Feeds paper one by one from the MP tray] in the printer
driver (or select [Yes]). To print continuously, uncheck [Feeds paper one by one from the MP tray] (or select
[No]). For details, see "Printing one sheet at a time manually(P.150)".
If there is no detail settings displayed in the [Print] screen, click [Show Details] at the bottom of the screen.
Printing on long paper
To print on long paper, change the setting of media type, and use the multi-purpose tray (MP tray) and the
rear output tray.
First, set the media size for the MP tray on the operator panel. Next, register the media size and media weight
in the printer driver.
The media size that can be registered ranges from 55 mm to 216 mm in width and from 91 mm to 1,321 mm
in length.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
