Changing settings from the operator panel
- 97 -
Adjusting the buzzer volume
The volume of the following buzzers is adjustable in three steps.
Paper jam buzzer
Printing completion buzzer
Buzzer for AirPrint printing
IC Card hold buzzer
1
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and
press «OK».
2
Input the admin password using the numeric keypad, and press «OK».
3
Press ▼ or ▲ several times to select [Buzzer Setup], and press «OK».
4
Press▼ or ▲ several times to select the item to change, and press «OK».
5
Adjust the volume of the selected item, and press «OK».
6
Press «ON LINE» to return to the standby screen.
To Next Page
Loading...
