Useful software
- 257 -
Color Swatch Utility
You can print RGB color samples using the Color Swatch Utility. By checking the printed color sample and
adjusting the RGB value as needed, you can print your desired colors from the application.
It is not applicable to macOS.
The Color Swatch Utility is installed automatically when the printer driver is installed.
Printing a color sample
1
Click [Start], and select [Okidata] - [Color Swatch Utility].
2
Click [Print].
3
Select the device you want to adjust from [Name].
4
Click [OK].
5
Confirm the color you want to print from the color sample, and write down the RGB value.
Customizing the color sample
If you cannot find the color you want to print in Step 5 of "Printing a color sample(P.257)", follow the procedure
below to customize the color.
1
Click [Switch].
2
Click [Detail].
3
Adjust the three slide bars until the color you want is displayed.
4
Click [Close].
5
Click [Print].
6
Select this machine from [Name].
7
Click [OK].
8
Check that the color is adjusted as you wish.
If you are not satisfied with the result, repeat Steps 1 to 8.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
