Connecting to the PC after preparing the device
- 18 -
Unpacking
Doing so may cause injury.
This machine weighs approx. 30 kg, so be sure to have it lifted by at least 2 persons.
Be sure to start with the consumables/maintenance parts supplied with this machine. If you start with
consumables/maintenance parts other than those supplied, the lifespan may not be displayed correctly or the
accessories may not be usable later.
Because the image drum (green part) can easily get damaged, handle with adequate care.
Do not expose the image drum to direct sunlight or strong light exceeding approx. 1,500 lux. Do not leave it
uncovered for more than 5 minutes even under room lighting.
Do not expose the removed fuser unit to direct sunlight or strong light exceeding approx. 1,500 lux. Do not leave it
uncovered for more than 5 minutes even under room lighting.
The packing case and buffer materials are required to ship this machine. Do not discard them, but store them safely.
1
Open the packing case and take out the accessories and buffer materials.
2
Remove the packing case and take out this machine from the plastic bag.