Oki C650 - Page 104

Changing settings from the operator panel
- 104 -
Item
Description
Wireless(Infrastructure)
Information
* Displayed when the wireless
LAN
module (optional) is installed.
Firmware
Version
Displays the wireless network firmware version.
Wireless(Infrastr
ucture)
Displays the state (enabled or disabled) of the
wireless network (infrastructure).
SSID Displays the SSID of the connected wireless
network access point.
Security Displays the security type of the wireless
network connection.
State Displays the connection status of the wireless
network.
Band Displays the frequency bands of the current
wireless network.
Channel Displays the channel number used by the
wireless network.
RSSI Displays the signal strength of the wireless
network.
IPv4 Address Displays the IP address of the wireless
network.
Subnet Mask
Displays the subnet mask.
Gateway
Address
When the [Enabling Default Gateway] is set to
[Wireless(Infrastructure)], the gateway address
is displayed.
MAC Address Displays the MAC address of the wireless
network.
IPv6 Address
(Local)
Displays the IPv6 address (local).
IPv6 Address
(Stateless
Address)
Displays the IPv6 address (stateless).
IPv6 Address
(Stateful
Address)
Displays the IPv6 address (stateful).
Wireless(AP Mode) Information
* Displayed when the wireless LAN
module (optional) is installed.
Wireless (AP
mode)
Displays the state (enabled or disabled) of the
wireless network (AP mode).
SSID
Displays the SSID of this machine.
Password
Displays the password.
Number of
connected
Displays the number of wireless terminals
which are currently connected.
IPv4 Address
Displays the IP address.
System
Serial Number
Indicates the serial number of the printer.
Asset Number
Indicates the asset number of the printer.
Lot Number
Indicates the lot number of the printer.
Firmware
Version
Indicates the version of firmware.
CU Version Indicates the firmware version of the Control
Unit (CU).
PU Version Indicates the firmware version of the Print Unit
(PU).
Panel Version Indicates the firmware version of the operator
panel.
RAM Indicates the total capacity of all RAM installed
in this machine.
Flash Memory Indicates the total value capacity of all flash
memories installed in this machine.