Changing settings from the operator panel
- 122 -
Item
Factory
default
Description
Left Margin 0.0 inch Specifies the distance from the left edge of
paper so that the print starting point shifts to
Fit To Letter Disable or
Enable
*1
Sets the printing mode that can fit paper to
the printable area equivalent to 11 inches
Text Height Same Sets the height of a character.
Same: The height stays the same
regardless of CPI.
Diff: The height varies according to CPI.
Private Print
Setup
Verify job option Disable Specifies whether to verify the print data
before printing.
If enabled, printing is performed after
verifying that the print data has not been
changed. The integrity of print data is
guaranteed, but the time to start printing will
Erase job option No overwrite Sets the method for erasing the print data.
Specifies that the data cannot be
overwritten after it has been erased and
cannot be restored.
If you overwrite, it will take longer to erase.
Value range: No overwrite/Zero out once
Keep job for 2hours Sets the retention period of the print data.
After the print data is saved, if the print data
is not printed after the set period, the print
data is automatically deleted.
Value range: 15 min/30 min/1 hour/2
hours/4 hours/8 hours/12 hours/1 day/2
days/3 days/4 days/5 days/6 days/7 days
Job Limitation Enable all
print formats
Sets whether to save restricted print data.
When [Private Print only] is selected, print
data other than private print will not be
Verify job password Off Selects whether to verify the job password
when the access control is enabled.
Job Auto Search On Selects whether to perform job search at the
same time as unlocking the panel when the
access control is enabled.
Color Setup Ink Simulation Off The printer comes with a built-in process
simulation tool that simulates standard
printing colors on the printer.
Adjusts the degree of under color removal.
CMY100% Density Disable Selects whether to use halftone for C, M, Y
CMYK Conversion On Selects whether to perform CMYK
conversion in the simple (high speed) mode.
Panel Setup Near Life Status Enable Sets whether to display a message when
the supplies or maintenance parts are
approaching the end of service life.
To Next Page
Loading...
