Connecting to the PC after preparing the device
- 23 -
Ethernet and wireless LAN can be used simultaneously on different networks.
Model: 45830222
1
Turn off this machine and unplug the power cord.
If you install it with the power on, the main unit or wireless LAN module may be damaged.
Turning the power off(P.71)
2
Open the wireless LAN module cover on the side of this machine.
3
Pull out the connector and insert it into the wireless LAN module.
4
Insert the wireless LAN module into this machine.
5
Close the wireless LAN module cover.
6
Connect the power cord to this machine.
Connecting the power cord(P.33)
7
Power on this machine.
8
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and
press «OK».
To Next Page
Loading...
