Management of this machine
- 241 -
15
Pinch the protrusion of the anti-tip foot b through the hole on the caster stand and push it out to
remove the anti-tip foot b. Follow the same procedure to remove the remaining anti-tip feet b.
16
Remove the anti-tip foot a from the caster stand.
17
Put the caster stand in the packing box. At the same time, put the metal fixtures (x 2) of the
caster stand, positioning pins (x 2), anti-tip feet b (x 3), and anti-tip foot a that were removed in
Steps 13 to 16 in the packing box.
Be careful not to lose the fixing parts that were removed.
To Next Page
Loading...
