Connecting to the PC after preparing the device
- 26 -
4
Fix the stacked expansion trays on both sides with accessories by using a flat-head
screwdriver.
5
With the main unit and the expansion trays aligned on the right side and front, gently stack them
so that the protrusions of the expansion tray fit into the holes on the bottom of the main unit.
6
Fix the main unit and the expansion trays by using a flat-head screwdriver.
When transporting this machine, replacing consumables or maintenance parts, or loading paper in the tray,
check the following points to avoid the risk of tipping.
To Next Page
Loading...
