Maintenance
- 317 -
8
Press down on the center of the MP tray, place your finger over the small window on the
separation roller cover and push it up to remove the separation roller.
9
Wipe the separation roller with a cloth slightly moistened with water (while rotating it in the
arrow direction).
10
Press down on the center of the MP tray until the left trapezoidal part of the separation roller
cover fits into the groove on the machine.
11
Ensure that the separation roller is in a horizontal position, and then push both ends of the
separation roller cover down at the same time.
Do not touch the rubber portion of the roller.
To Next Page
Loading...
