Troubleshooting
- 335 -
---
Non Recommended Belt
Unit.Search Keyword: P40444
- The belt unit is not optimal for this machine.
It is recommended to use the belt unit that is optimal for this
---
Non Recommended Fuser
Unit.Search Keyword: P40439
- The fuser unit is not optimal for this machine.
It is recommended to use the fuser unit that is optimal for this
---
Job Log Database Error
Contact The Device Administrator
Press OK To Hide This Message
- A database access error has occurred to writing or reading of
print data logs. Turn off this machine and then turn it back on. If
the same error message is displayed again, contact your
---
Decode Error Occurred
Press OK To Hide This Message
- Unable to print because an error has occurred to the image
data.
Please check the image data.
---
Password Required To Print
Press OK To Hide This Message
- Printing restrictions have been imposed on the PDF file. Please
input the password required to print.
---
Invalid Password
Press OK To Hide This Message
- Unable to print because the password set in the PDF file does
not match the password you input.
Please input the correct password.
---
File System Operation Failed
<nnn>
Press OK To Hide This Message
- A file system error has occurred.
Press «OK» on the operator panel to hide the message.
---
Belt Unit Near Life. Search
Keyword: P10978
- The belt unit is approaching the end of its service life.
Please prepare a new belt unit.
After the message of replacement is displayed, please replace
---
Change Belt Unit. Search
- The belt unit has reached the end of its service life.
Please replace the belt unit with a new one. To replace the belt
unit, see "Replacing the belt unit(P.308)".
---
Error Postscript
- An error has occurred to Postscript data.
Please check the print result.
If there is a problem with the print result, print again.
The problem may be solved if you select [Optimize for
Portability] in the Postscript output option of the PS printer
---
Log Buffer Is Full. Job Rejected
Press OK To Hide This Message
- The print data was deleted because the log buffer is full.
Please contact the printer administrator and delete the log.
---
Print Restricted. Job Rejected
Press OK To Hide This Message
- The print data from an user unauthorized to print was deleted.
To print, contact the administrator of this machine.
---
Job Type Restricted
Job Rejected
Press OK To Hide This Message
- The print data was canceled because only Private Print is
enabled with restrictions.
Select Private Print from Job Type in the printer driver. See
"Printing with print data encrypted and password set (Private
---
Expired Saved Files Have Been
Deleted
Press OK To Hide This Message
- The private print document whose retention date has passed
was deleted.
To Next Page
Loading...
