Connecting to the PC after preparing the device
- 38 -
8
Use either the scroll buttons or the numeric keypad to input the first 3 digits of the IP address,
and press «OK».
Input the next 3 digits in the same way. To move to the next box, press «OK».
Press «OK» after inputting all the digits.
9
Check that the cursor has returned to the first 3 digit, and press «BACK».
10
Press ▼ to select [Subnet Mask], and press «OK».
11
Input the subnet mask in the same way as the IP address. Press «OK» after inputting all the
information, check that the cursor has returned to the first 3 digit, and press «BACK».
12
Press ▼ to select [Gateway Address], and press «OK».
13
Input the gateway address in the same way as the IP address. Press «OK» after inputting all
the information, check that the cursor has returned to the first 3 digit, and press «BACK».
To Next Page
Loading...
