Omron CJ2 CPU UNIT SOFTWARE - System Configurations for Accessible Plcs

11 Programming Devices and Communications
11-4
CJ2 CPU Unit Software User’s Manual
Select a network type as given in the following table.
11-1-2 System Configurations for Accessible PLCs
Direct Serial Connection with PLC
Connect-
ing Cable
System configuration
Change PLC Dialog
Box (network type)
Automatic online connection
Direct connec-
tion
EtherNet/IP
connection
USB cable USB Accessible Not accessible
Accessing a FINS Network
* The local network table must be set.
Toolbus (USB port) Accessible Not accessible
RS-232C
cable
Toolbus Accessible Not accessible
CX-Programmer
CJ2
USB
CX-Programmer
CJ2*
USB
FINS Network Communications Unit
CX-Programmer
CJ2
RS-232C