Omron CJ2 CPU UNIT SOFTWARE User Manual

A-177
Appendices
CJ2 CPU Unit Software User’s Manual
A-8 Functions Supported for Unit Versions
App
A-8-1 CJ2H CPU Unit
A-8 Functions Supported for Unit
Versions
CX-Programmer version 9.1 or higher must be used to enable using the functions added for unit ver-
sion 1.3.
CX-Programmer version 8.3 or higher must be used to enable using the functions added for unit ver-
sion 1.2.
Note User programs that use functions of CJ2H CPU Units with unit version 1.2 or later cannot be used with CJ2H
CPU Units with unit version 1.1 or earlier. If an attempt is made to transfer a program that uses any of these
functions from the CX-Programmer to a CPU Unit with unit version 1.1 or earlier, an error will be displayed
and it will not be possible to download to the CPU Unit.
A-8-1 CJ2H CPU Unit
Functions Supported for Unit Version 1.3 or Later
Units CJ2H CPU Units
Models CJ2H-CPU6@-EIP and CJ2H-CPU6@
Unit version
Function
Unit version
1.3 or later
Unit version
1.2
Unit version
1.1
Unit version
1.0
Special
instruc-
tions for
certain
Special I/O
Units
CJ1W-NC281/NC481/NC881
Position Control Units: PCU
HIGH-SPEED POSITIONING
(NCDMV(218))
Supported. Not sup-
ported.
Not sup-
ported.
Not sup-
ported.
CJ1W-NC281/NC481/NC881
Position Control Units: PCU
POSITIONING TRIGGER
(NCDTR(219))
Supported. Not sup-
ported.
Not sup-
ported.
Not sup-
ported.
New spe-
cial
instruc-
tions
SIGNED AREA RANGE
COMPARE: ZCPS(088)
Supported. Not sup-
ported.
Not sup-
ported.
Not sup-
ported.
DOUBLE SIGNED AREA
RANGE COMPARE:
ZCPSL(116)
Supported. Not sup-
ported.
Not sup-
ported.
Not sup-
ported.
Unit Version 1.2 or Later
Unit CJ2H CPU Units
Model
CJ2H-CPU6@-EIP
CJ2H-CPU6
@
Unit version
Function
Unit version 1.2 or later Unit versions earlier than 1.2
EM Area Force-setting/resetting Supported. Not supported.

Omron CJ2 CPU UNIT SOFTWARE Specifications

General

Brand	Omron
Model	CJ2 CPU UNIT SOFTWARE
Category	Software
Language	English