Appendices
A-134
CJ2 CPU Unit Software User’s Manual
A395 A395.06 File Deleted
Flags
The system deleted the remainder of a Memory Card file that was
being updated when a power interruption occurred.
ON: File deleted
OFF: No files deleted
Cleared Cleared Refreshed when the
system deletes the
file.
A395.07 The system deleted the remainder of an EM file memory file that
was being updated when a power interruption occurred.
ON: File deleted
OFF: No files deleted
Cleared Cleared Refreshed when the
system deletes the
file.
A395.10 ER/AER Flag for
Background Exe-
cution
ON when an instruction processing error or an illegal area access
error occurs during background processing.
ON: Error. OFF (0) when power is turned ON. OFF (0) when oper-
ation starts.
OFF: No errors. OFF (0) when background processing starts.
Cleared Cleared ---
A395.11 Memory Corrup-
tion Detected
Flag
ON when memory corruption is detected when the power supply
is turned ON.
ON: Memory corruption
OFF: Normal operation
Retained See
Function
column.
Refreshed when
power is turned ON.
A395.12 DIP Switch Pin 6
Status Flag
The status of pin 6 on the DIP switch on the front of the CPU Unit
is written to this flag every cycle.
ON: Pin 6 ON
OFF: Pin 6 OFF
Retained See
Function
column.
Written every cycle.
A400 --- Error code When a non-fatal error (user-defined FALS(006) or system error)
or a fatal error (user-defined FALS(007) or system error) occurs,
the 4-digit hexadecimal error code is written to this word. (Refer to
A-3-3 Details on Auxiliary Area Operation) on page A-161.
When two or more errors occur simultaneously, the highest error
code will be recorded.
Cleared Cleared Refreshed when
error occurs.
Address
Name Function
Status
after mode
change
Status at
startup
Write timing/
Related flags, set-
tings
Words Bits
To Next Page
Loading...
