Omron CJ2 CPU UNIT SOFTWARE User Manual

4 CPU Unit Initialization
4-6
CJ2 CPU Unit Software User’s Manual
z CPU Bus Unit Setup Area
If specific CPU Bus Units, such as Ethernet Units, Controller Link Units, or FL-net Units are used,
the particular settings for each of those Units must be made and transferred to the CPU Unit.
Example: Using an Ethernet Unit
Make the Ethernet settings using the CX-Programmer.
To make Ethernet settings, right-click the Ethernet Unit in the I/O tables of the CX-Programmer, and
then select Edit CPU Bus Unit Settings.
Make the settings for the Ethernet Unit in the I/O tables of the CX-Programmer, and then transfer the
I/O tables to the CPU Unit.
Additional Information
If user-set data link tables are to be used with a Controller Link Unit, set the data link tables and
then save them in the CPU Unit.
PERIPHERAL
ERR/ALM
RUN
INH
COMM
PRPHL
CONTR
OLLER
PROGRAMM
ABLE
PO
RT
OPEN
BUSY
MC
PWR
BKUP
CPU64-EIP
CJ2H
SYSMAC
NS
MS
C
O
M
M
10M
100M
RD2
SD2
RDY
NO.
UNIT
ERH
NO.
NODE
ERC
RUN
ETN11
RD1
TER1
SD1
ETHRNE
T
Transferring from the CX-Programmer
CPU Unit
Ethernet Unit
Ethernet setup
Make settings for the Unit
in the I/O tables and then
transfer the settings to the
Ethernet Unit.

Omron CJ2 CPU UNIT SOFTWARE Specifications

General

Brand	Omron
Model	CJ2 CPU UNIT SOFTWARE
Category	Software
Language	English