Section 10 Transferring Data 10-1 Transferring Data to the PT
NS-Designer Operation Manual
Modem Communications
1. Make the following settings on the Network Tab Page.
1
No. Field Item Details
1 Response
timeout
- Set the response timeout time. Increase the time only when there
are frequent communications errors.
2. Make the following settings on the Modem Tab Page.
The settings on the Driver Tab Page do not need to be made if the following settings are made on
the Modem Tab Page.
1
2
3
4
5
No. Field Item Details
1 Modem -
Select the modem driver. Click the Configure Button to display
the Modem Property Dialog Box.
2 Current Loca-
tion
- Set the location of the local modem.
3 Country Code Set the country code of the destination modem, even when
communicating within the same country.
4 Area Code Set the area code of the destination modem, even when com-
municating within the same area.
5
Connect To
Telephone
Number
Set the phone number of the modem to which to connect.
10-18
To Next Page
Loading...
