132
Clocks Section 7-9
3. Double-click CL0 of the clock part at the upper left and change the settings.
4. Double-click the data part in the center and change the settings.
5. Double-click the clock part at the upper right and change the settings.
6. Double-click the data part at the lower left and change the settings.
Double-click "CLO" at the
upper left and change the set-
tings as shown below.
Click the OK Button when you
are finished.
Basic Setup
Clock: Year
Zero suppression: Off
Double-click "CL1" at the
upper center and change the
settings as shown below.
Click the OK Button when you
are finished.
Basic Setup
Clock: Month (1, 2, ...)
Note The month can be
selected from a table.
Double-click "CL2" at the
upper right and change the
settings as shown below.
Click the OK Button when you
are finished.
Basic Setup
Clock: Day
Double-click "CL3" at the
upper right and change the
settings as shown below.
Click the OK Button when you
are finished.
Basic Setup
Clock: Hour (in 24-hr format)
To Next Page
Loading...
