149
Alarm Lists (NV4W/NV3Q) Section 7-11
(2) The referenced number of alarms sets the number of alarm messages
that are recorded. Set the Monitoring Alarm Number in the NV Configu-
ration so that it is greater than or equal to the Current Alarm Number.
(3) Stop Updating
The specified bit can be used to stop updating the display. Updating the
display will be stopped while the specified bit is ON. Sampling continues.
6. Click the Color and Form Tab and make the settings.
7. Click the Element Setup Tab.
Make the settings as shown
below.
Display Area Number
of Lines: 8
Display Frame: On
Type: Out-
side +
Inside
Frames
Color: Black
Color & String
Triggered, Recov-
ered, and Acknowl-
edged:
Black
Click the String Setting Button
and set character strings as
shown below.
Triggered: Fixed (NV-
Designer)
Tr ig
Recovered: Fixed (NV-
Designer)
Rcv
Acknowl-
edged:
Fixed (NV-
Designer)
Ack
Select the number and click
the Setup Button or double-
click the message to display
the Message Dialog Box.
To Next Page
Loading...
