Omron NV Series - Page 171

150
Alarm Lists (NV4W/NV3Q) Section 7-11
8. Enter the alarm message.
9. Set the function switch for acknowledging the alarm history.
10. Double-click the FS0 function switch and set the operation mode.
11. Double-click the FS1 function switch and set the operation mode.
Enter the message to display
for the alarm.
Note Bit 0 of the start moni-
toring address corre-
sponds to message 0.
Click the OK Button after all of
the messages have been
entered.
Make the following settings,
and then click the OK Button.
Setting to Scroll Up the Alarm
Display
Operation Mode: Others, To
Operate
Alarm
Parts (Cur-
sor up per
Line)
Color & String: Set as
required.
Make the following settings,
and then click the OK Button.
Setting to Scroll Down the
Alarm Display
Operation Mode: Others, To
Operate
Alarm
Parts (Cur-
sor down
per Line)
Color & String: Set as
required.