154
Alarm Lists (NV4W/NV3Q) Section 7-11
8. Double-click the FS0 function switch and set the attributes.
9. Double-click the FS1 function switch and set the operation mode.
10. Double-click the FS2 function switch and set the operation mode.
Make the following settings,
and then click the OK Button.
Setting to Scroll Up the Alarm
Display
Basic Setup
Operation Mode: Others, To
Operate Alarm List (Cursor up
per line) set as required.
Label
ON String: UP
OFF String: UP
Make the following settings,
and then click the OK Button.
Setting to Scroll Down the
Alarm Display
Basic Settings
Operation Mode: Others, To
Operate Alarm Parts (Cursor
down per Line)
Label
ON String: DOWN
OFF String: DOWN
Make the following settings,
and then click the OK Button.
When a triggered alarm is
selected and this switch is
pressed, the guidance for the
alarm will be displayed.
Basic Settings
Operation Mode: Others, To
Operate Alarm List (Display
Guidance)
Label
ON String: GUIDE
OFF String: GUIDE
To Next Page
Loading...
