Omron NV Series - Page 174

153
Alarm Lists (NV4W/NV3Q) Section 7-11
5. Make the element settings.
6. Position the guidance display.
7. Then, paste a switch for scrolling.
Select the number and click
the Setup Button or double-
click the message to display
the Message Dialog Box.
↓
Enter the message to display
for the alarm, as well as the
guidance for the message.
Double-click the message to
display the Input Dialog Box.
Click the OK Button when you
are finished.
• Message Setting Example
Enter “Power Supply Error.”
• Guidance Setting Example
Check the following factors.
Enter “Is the breaker ON? Is
the power switch OFF?
Check the power supply
line.”
Paste the guidance at the
desired position.
Paste three FSW0 function
switches from the Standard
Parts Library on the base
screen.