19
NV-Designer Window Names and Menus Section 3-2
Edit Undo Undoes the previous operation.
Redo Redoes the previous operation.
Cut Cuts the selected parts.
Copy Copies the selected parts.
Repeat Creates a base part which is copied to enable the creation of
multiple parts with different functions.
Paste Pastes the parts that were last cut or copied.
Copy Bitmap of Base
Screen
Copies the base screen contents as bitmap data.
Align Left Aligns the left sides of the selected graphics.
Right Aligns the right sides of the selected graphics.
Top Aligns the top edges of the selected graphics.
Bottom Aligns the bottom edges of the selected graphics.
Horizontal Center Aligns the horizontal centers of the selected graphics.
Vertical Center Aligns the vertical centers of the selected graphics.
Centering Centers multiple graphics figures.
Rotate Rotates the selected graphics.
Flip Right/Left Flips the selected graphics left to right.
Top/Bottom Flips the selected graphics top to bottom.
Delete Deletes the selected items.
Erase Screen Deletes the base screen
Bring Previous Moves the selected graphic up one layer.
Bring Next Moves the selected graphic back one layer.
Bring Forefront Places the selected graphics on the top.
Bring Behind All Places the selected graphics on the back.
Group Creates a group of character strings, graphics, or parts.
Ungroup Ungroups a group of parts.
Select Selects character strings, graphics, and parts.
Select All Selects all character strings, graphics, and parts on the base
screen.
Menu Submenu/Command Description
To Next Page
Loading...
