Omron OMNUC G Series

5-56
5-26 User Parameters
Operating Functions
5
3. Switching to the Parameter Setting Display
4. Setting the Parameter Number
5. Displaying the Parameter Setting
6. Changing the Parameter Setting
 The following operation is not required if you are only checking a parameter setting.
7. Returning to Parameter Setting Mode
 The following operation is not required if you are only checking a parameter setting.
Key
operation
Display example Explanation
Press the key to go to the Parameter Setting Display.
Press the key to return to the Parameter Type Selection Display.
Key
operation
Display example Explanation
Set the number of the parameter to be set or checked.
Key
operation
Display example Explanation
Press the key to display the setting.
The selected parameter number appears in the sub window.
Key
operation
Display example Explanation
Use the keys to change the setting.
The decimal point will flash for the digit that can be set.
Press the key to save the new setting.
Key
operation
Display example Explanation
Press the key to return to Parameter Setting Mode.
pknk_krk0k0.k
1k6
pknk_k k0k4.
1k6
k k k k k0
0k4
k k k k k3
0k4
k k k k k3
0k4
pknk_krk0k0.k
1k6