Omron OMNUC G Series

5-60
5-26 User Parameters
Operating Functions
5
6. Changing the Parameter Setting
 The following operation is not required if you are only checking a parameter setting.
7. Returning to Parameter Setting Mode
 The following operation is not required if you are only checking a parameter setting.
Key
operation
Display example Explanation
Use the keys to change the setting.
The decimal point will flash for the digit that can be set.
Press the key to save the new setting.
Key
operation
Display example Explanation
Press the key to return to Parameter Setting Mode.
k k1k0k0k0
1k0
k k1k0k0k0
1k0
pknk_k k1k0
skU