Omron OMNUC G Series

5-59
5-26 User Parameters
Operating Functions
5
 Operating Procedures for Servo Parameters
1. Displaying Parameter Setting Mode
2. Selecting the Parameter Type
3. Switching to the Parameter Setting Display
4. Setting the Parameter Number
5. Displaying the Parameter Setting
Key
operation
Display example Explanation
The default display is displayed.
Press the key to display Monitor Mode.
Press the key to display Parameter Setting Mode.
Key
operation
Display example Explanation
Press the keys to select the servo parameter.
Key
operation
Display example Explanation
Press the key to go to the Parameter Setting Display.
Press the key to return to the Parameter Type Selection Display.
Key
operation
Display example Explanation
Set the number of the parameter to be set or checked.
Key
operation
Display example Explanation
Press the key to display the setting.
The selected parameter number appears in the sub window.
Uknk_k5kpkd
1k6kbkiktkp
skekrkUkokp
pknk_k k0k0.
skU
pknk_k k1k0
skU
k k k4k0k0
1k0