Omron OMNUC G Series User Manual

5-58
5-26 User Parameters
Operating Functions
5
6. Changing the Parameter Setting
 The following operation is not required if you are only checking a parameter setting.
7. Returning to Parameter Setting Mode
 The following operation is not required if you are only checking a parameter setting.
Key
operation
Display example Explanation
Use the keys to change the setting.
The decimal point will flash for the digit that can be set.
Press the key to save the new setting.
Key
operation
Display example Explanation
Press the key to return to Parameter Setting Mode.
k1k0k0k0k0
0k0
Hk k k k k
0k0
Hk k k k k
0k0
k1k0k0k0k0
0k0
pknk_krk0k0.k
3k2

Omron OMNUC G Series Specifications

General

Brand	Omron
Model	OMNUC G Series
Category	Servo Drives
Language	English