Omron OMNUC G Series User Manual

5-80
5-26 User Parameters
Operating Functions
5
073
Overspeed
Detection
Level Setting
Sets the overspeed detection level.
The overspeed detection level is 1.2 times the maximum
Servomotor rotation speed when the parameter is set to 0.
Normally, use a setting of 0, and set the level only when
reducing the overspeed detection level.
Note The detection margin of error for the setting is
±3 r/min for a 7-core absolute encoder and
±36 r/min for a 5-core incremental encoder.
0 r/min 0 to 20000 A
074
Reserved
Do not change. 0 --- --- ---
075
Reserved
Do not change. 0 --- --- ---
076
Reserved
Do not change. 0 --- --- ---
077
Reserved
Do not change. 0 --- --- ---
078
Reserved
Do not change. 0 --- --- ---
079
Reserved
Do not change. 0 --- --- ---
07A
Reserved
Do not change. 0 --- --- ---
07B
Reserved
Do not change. 0 --- --- ---
07C
Reserved
Do not change. 0 --- --- ---
07D
Reserved
Do not change. 0 --- --- ---
07E
Reserved
Do not change. 0 --- --- ---
07F
Reserved
Do not change. 0 --- --- ---
Pn
No.
Parameter name Setting Explanation
Default
setting
Unit
Setting
range
Attribute

Omron OMNUC G Series Specifications

General

Brand	Omron
Model	OMNUC G Series
Category	Servo Drives
Language	English