Omron OMNUC G Series User Manual

8-14
8-3 Troubleshooting
Troubleshooting
8
95
Servomotor
non-conformity
 The combination of the Servomotor
and Servo Drive is not appropriate.
 Use the Servomotor and Servo Drive
in the correct combination.
96 CPU error 9 The Servo Drive is faulty. Replace the Servo Drive.
97 CPU error 10 The Servo Drive is faulty. Replace the Servo Drive.
99 CPU error 11 The Servo Drive is faulty. Replace the Servo Drive.
Alarm
code
Alarm Name Cause Countermeasure

Omron OMNUC G Series Specifications

General

Brand	Omron
Model	OMNUC G Series
Category	Servo Drives
Language	English