Omron OMNUC G Series

2-11
2-1 Standard Models
2
Standard Models and Dimensions
Decelerators for 3,000-r/min Flat Servomotors
Note1. The standard models have a straight shaft.
Note2. Models with a key and tap are indicated with "J" at the end of the model number
(the suffix shown in the box). (Example: R88G-HPG11B05100PBJ)
Specifications
Model
Motor
capacity
Gear ratio
100 W
1/5 R88G-HPG11B05100PB
1/11 R88G-HPG14A11100PB
1/21 R88G-HPG14A21100PB
1/33 R88G-HPG20A33100PB
1/45 R88G-HPG20A45100PB
200 W
1/5 R88G-HPG14A05200PB
1/11 R88G-HPG20A11200PB
1/21 R88G-HPG20A21200PB
1/33 R88G-HPG20A33200PB
1/45 R88G-HPG20A45200PB
400 W
1/5 R88G-HPG20A05400PB
1/11 R88G-HPG20A11400PB
1/21 R88G-HPG20A21400PB
1/33 R88G-HPG32A33400PB
1/45 R88G-HPG32A45400PB