Oracle SPARC T5-8 User Manual

Remove the Front I/O Assembly
128 SPARC T5-8 Server Service Manual • November 2015
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause server components to fail.
1.
Take the necessary ESD precautions.
See “Prevent ESD Damage” on page 57.
2.
Remove the main module from the server.
See “Remove the Main Module” on page 91.
3.
Locate the front I/O assembly on the main module.
See “Main Module Internal Component Locations” on page 17.
4.
Locate the cable that connects the front I/O assembly to the motherboard.
No. Description
1 Front I/O assembly

Oracle SPARC T5-8 Specifications

General

Brand	Oracle
Model	SPARC T5-8
Category	Server
Language	English